- Columbus, Ohio • 24/7 Emergency Service
Furnace Repair in Columbus, OH
Furnace repair in Columbus, OH, answered 24 hours a day. Columbus Furnace Repair connects local homeowners with furnace technicians across Columbus and the suburbs, nights, weekends, and holidays included. No heat, cold air blowing from the vents, loud banging, or a furnace that won’t turn on at all: one call gets a local pro dispatched, with the price quoted upfront before any work starts. Most Columbus furnace repairs cost between $123 and $505 (average $304, Angi). When Columbus nights drop to 22°F, you shouldn’t be waiting until Monday.
Call 24/7
Emergency service across Columbus, Ohio

Complete Furnace Inspection
Comprehensive diagnostic checks for ignition, airflow, safety controls, and heating performance.
Furnace Repair
Furnace Replacement
Ignitor Repair
Flame Sensor Service
Blower Motor Repair


Emergency Help, Day or Night
- Why Columbus Calls Us
Why Do Columbus Homeowners Call Columbus Furnace Repair?
Columbus Furnace Repair is a furnace-only repair service for Columbus, Ohio homeowners. We handle emergency no-heat calls 24/7 and scheduled repairs for every common gas furnace failure: failed ignitors, dirty flame sensors, dead blower motors, short cycling, cold air, strange noises, thermostat faults, and condensate leaks. Every repair starts with a full diagnostic and an upfront price, the average Columbus furnace repair is $304 (Angi), and you approve the quote before work begins. If your furnace is 15+ years old and the repair exceeds half the cost of a new system, we’ll show you the repair-vs-replace math honestly instead of selling you the bigger ticket.
January in Columbus averages a mean temperature of 29.6°F with overnight lows around 22°F (NOAA), plus roughly 27 inches of snow a year. Furnaces here run five to six months straight, which is why ignitors crack, flame sensors oxidize, and blower motors seize mid-season, and why 24/7 emergency dispatch exists on this site at all.
Full furnace diagnostics
Upfront price before work
- Furnace-only focus, no AC, plumbing, or electrical distractions
- Residential gas furnace repair across Columbus and the suburbs
- Honest repair-vs-replace advice, with the math shown
Average Columbus Furnace Repair Cost (Angi)
Columbus Suburbs Served
Major Furnace Brands Serviced
- Our Services
What Furnace Repair Services Are Available in Columbus, OH?
From a dead furnace at 2 a.m. to a planned replacement before winter, every visit starts with a real diagnosis of the failed part, the ignitor, flame sensor, blower, or control, not a guess. You approve the price before any work starts.

Repair
Emergency Furnace Repair
No-heat calls answered 24/7 with priority dispatch, same-day furnace repair across Columbus, faster in freezing weather.
- 24/7 emergency dispatch
- Price quoted upfront

Replacement
Furnace Repair & Replacement
Full diagnostics and repair for all major gas furnace brands, plus honest replacement guidance when a repair stops making sense.
- All major furnace brands
- Replacement costs explained

Maintenance
Furnace Tune-Up & Maintenance
A fall tune-up before heating season: cleaning, safety checks, and the small fixes that prevent January breakdowns.
- Full safety & CO checks
- Ignition and airflow testing

24/7
Emergency
Service
How Much Does Furnace Repair Cost in Columbus?
Most furnace repairs in Columbus cost between $123 and $505, averaging $304 (Angi). A flame sensor cleaning or a thermostat fix sits at the low end; a blower motor replacement can exceed $1,000 depending on the motor. Whatever the job, you’ll know the exact price before work begins, no after-the-fact surprise charges.
If your furnace is under 15 years old with a single failed part, repair almost always wins. Frequent breakdowns, a 15 to 20+ year-old system, or a quote over half the cost of a new unit point the other way, and a cracked heat exchanger means replacement, because that’s a carbon-monoxide safety issue, not a repair.
- Common Furnace Problems
Common Furnace Problems We Fix in Columbus
Furnace Won’t Turn On
Check the thermostat, breaker, filter, and furnace power switch first. If it still won’t start, the ignitor, flame sensor, or control board may have failed, that needs a technician.
Strange Furnace Noises
Banging can mean delayed ignition; rattling points to loose panels; screeching or grinding usually means motor bearings. Noises that get louder need an inspection.

Furnace Keeps Shutting Off
Short cycling, starting, then stopping within minutes, usually comes from overheating, restricted airflow, a dirty flame sensor, or thermostat placement.
Furnace Blowing Cold Air
A failed ignitor, a dirty flame sensor shutting the burner down, a tripped high-limit switch, or the fan set to ON instead of AUTO can leave the blower pushing unheated air.
- Service Area
Which Columbus Suburbs Do You Serve?
All of Columbus, plus 14 suburbs across the metro. Inside the city, older housing in Clintonville, German Village, and the Short North often means 15 to 20-year-old furnaces still in service, right in the age range where ignitors, sensors, and motors fail. Wherever you are in the Columbus area, emergency dispatch covers you.

Columbus & Nearby Suburbs
More Areas Served
- Older Columbus Homes
Furnaces in Older Columbus Homes Need Attention
In neighborhoods like Clintonville, German Village, and the Short North, many homes still run 15 to 20-year-old furnaces, the age when ignitors crack, flame sensors oxidize, and blower motors wear out. A diagnostic before the first cold snap can prevent a no-heat emergency in January.
→
→
- Symptom Guide
Match Your Furnace Symptom

- No Heat at All
Furnace Won’t Turn On
- Likely causes, ignitor, thermostat, breaker, power switch
- Start with the 60-second homeowner checklist

- Starts, Then Stops
Flame Sensor Problems
- Likely cause, a dirty or failing flame sensor
- Fix, professional cleaning or sensor replacement

- Weak or No Airflow
Blower Motor Repair
- Likely cause, failed capacitor or seized blower motor
- Fix, test the capacitor before replacing the motor

- Water on the Floor
Furnace Leaking Water
- Likely cause, clogged condensate drain or trap
- Check first, rule out a cracked heat exchanger
- Upfront pricing, approved before work starts
- All major brands • 24/7, weekends & holidays
- FAQ
Furnace Repair FAQs, Columbus, OH
Real questions Columbus homeowners ask before they call, answered directly, with prices, timing, and safety steps first.
Columbus utilities, permits and your furnace
Most Columbus homes heat with gas from Columbia Gas of Ohio, with electricity supplied by AEP Ohio. That matters when you compare furnaces: a higher-efficiency gas furnace uses less Columbia Gas, while an electric furnace or heat pump would run on AEP Ohio electricity. If you are weighing furnace replacement against another repair, ask how the efficiency rating will change your gas use in a Columbus winter, when January nights average around 22°F.
A new furnace installation in Columbus usually requires a mechanical permit from the City of Columbus Building & Zoning Services. A permit is a homeowner-protection step, not paperwork for its own sake: it means the installation is inspected against code. Ask your contractor whether a permit is required for your job and who will arrange it. We do not claim to pull permits on your behalf. See furnace replacement in Columbus and furnace tune-up for the related costs and checks.
What to check before you hire any furnace company
Before you book, check that the company holds a verifiable Ohio HVAC licence (ask for the number and check it with the State of Ohio), whether its technicians hold NATE certification, and what its BBB standing is. We do not claim a licence number, NATE certification or BBB rating on this site. Use those checks on every company you call, including us, and get any quote in writing, itemised, with the part named.
Carbon monoxide safety: what every Columbus homeowner should know
Carbon monoxide (CO) is colourless and odourless. A cracked heat exchanger is the most serious furnace cause: exhaust gases, including CO, can leak into your living space instead of going up the flue. A cracked heat exchanger is not a part to patch and hope for the best. Get a second opinion and ask for photo or camera proof, or a combustion-analysis test. See our cracked heat exchanger second opinion page and what furnace smells mean.
Check your CO detectors now: one on every level of your home, replaced when the manufacturer says so (many expire after 7 to 10 years), and tested monthly. If a CO alarm sounds, leave immediately, call 911 from outside, and do not re-enter until emergency services say it is safe.
If you smell gas (rotten eggs), leave the home at once. Do not flip light switches, do not use a phone inside, and do not try to find the leak yourself. Once outside, call 911 and your gas utility, Columbia Gas of Ohio, from outside the home. If you have no heat on a freezing night, see emergency furnace repair in Columbus.
New furnace guides for Columbus homeowners
Start with the top 10 furnace problems in Columbus, then read carbon monoxide furnace safety in Columbus, what size furnace do I need, the best time for furnace maintenance, and furnace installation in Columbus. Our furnace repair cost guide breaks down typical prices by part.

Still have a furnace question? Call or message us
- Hours: Open 24 Hours, Every Day
- Service Area: Columbus, Ohio & Suburbs
Same-day service is available across the Columbus metro for most calls. Emergency no-heat calls get priority dispatch, in winter, a technician is typically on-site within hours. Calling early in the day gets you the fastest slot.
Most furnace repairs in Columbus cost between $123 and $505, averaging $304 (Angi). Simple fixes like flame sensor cleaning run under $250; bigger jobs like blower motor replacement can exceed $1,000 depending on the motor. You approve the exact price before any work begins. See the full breakdown on our Columbus furnace repair cost guide.
Yes, 24 hour furnace repair in Columbus includes nights, weekends, and holidays. Emergency calls are dispatched the same way every day of the year.
Yes. All major gas furnace brands, Carrier, Trane, Lennox, Goodman, Rheem, York, and Amana, from older pilot-light models to modern high-efficiency condensing furnaces.
Under 15 years old with a single failed part, repair it. Frequent breakdowns, a 15 to 20+ year-old system, or a repair quote over half the cost of a new unit, replacement usually wins. A cracked heat exchanger always means replacement; it’s a carbon-monoxide safety issue. Our repair-vs-replace guide walks through the math.
Leave the house immediately, don’t flip light switches and don’t use your phone inside. From outside, call your gas utility’s emergency line or 911. Once officials clear the home, call us for the repair.
Most often: a failed ignitor, a dirty flame sensor shutting the burner down, a tripped high-limit switch, or the thermostat fan set to ON instead of AUTO. Check the filter and thermostat mode first; if cold air continues, you need a technician. See why your furnace is blowing cold air.
All of Columbus, plus Dublin, Upper Arlington, New Albany, Worthington, Powell, Westerville, Hilliard, Grove City, Gahanna, Reynoldsburg, Pickerington, Delaware, and Lewis Center. See the full service area.
A furnace inspection in Columbus, OH covers the burner assembly, ignition system and flame sensor, safety controls and limit switches, heat exchanger, blower and airflow, venting, and thermostat calibration. It also includes checks for carbon monoxide and gas leaks. If anything is unsafe or worn, the technician explains the finding and quotes the repair before any work begins.